KIP 1030

Product Overview

Product Specifications

1030 Analog Copier

The 1030 is perfect for

engineering environments.

Copier Stand shown here

is optional.

The 1030 is a compact, low volume

production analog copier.

Features:

· Copies 3 “D” size copies / min.

· Copy Counter

· Self-Diagnostic Systems

· Automatic Reset

· 9- Step Toner Density Control

· Copies onto Bond, Vellum, or Film

· Stand-by mode

1030 Analog Copier

This sheet feed, low cost, high performance engineering copier is ideal

corridor, next to a drawing table, or even at a CAD station. The KIP 1030

offers the most popular features of full size model copiers in a compact, cost

effective copier.

The KIP 1030 is one of the smallest units of its kind available. Yet it provides

the plain paper technology, large copy capability, and sophisticated

functions found on full size copiers. With features like 9 step exposure control,

margin adjustment and self-diagnostic indicators, the KIP 1030 proves that

good things do come in small packages.

Simply plug the KIP 1030 into a standard wall outlet, and you're ready to

make sharp, top quality, high contrast copies up to 36” wide and 7' long. You

can copy onto bond, vellum, or film, from originals up to 1/16” thick. Copy

from various originals, like opaque or translucent, to produce technical

drawings, architectural renderings, posters and maps.

Copier Specifications:

Dimensions: 57” (W) x 21.6” (D) x 13.3” (H) Copy Material: Bond 20-29 lb.

Weight: 200 lbs Vellum 21-29 lb.

Power requirements: 15 Amps, 120V Film 3.5 mil.- 4.0 mil.

Power consumption: 1500W Copy Speed: 3 “D” size copies / min.

Copy delivery: Rear Originals: Minimum: 8.5” x 11”

Process Technology: Indirect Electrostatic Maximum: 36” x 7'

Development: Dual-Component Copies: Maximum width: 36”

Exposure System: Fluorescent Lamp, Selfoc Lens Maximum length: 7'

Reproduction Scale: 1:1

NOTE: All specifications subject to change without notice.